•Cleaning a suppressor is an important aspect of its maintenance to ensure it continues to function effectively. Here are the steps you can follow to clean your suppressor:
•1. Safety First: Be sure your weapon is unloaded and remove the suppressor.
•2. Cool Down: Allow the suppressor to cool down if it has been recently used. Suppressors can become very hot during firing.
•3. Disassembly (if applicable): Some suppressors can be disassembled for thorough cleaning. If yours can be taken apart, use the tool that came with your suppressor to remove the cap.
•4. Brushing and Scrubbing:
• a. Exterior: Use a nylon brush or toothbrush to remove any loose dirt, debris, or fouling from the exterior. Pay special attention to the end cap, baffles, and the threads.
• b. Interior (for disassembled suppressors): If your suppressor can be taken apart, use a bore brush or a brush designed for suppressors to clean the interior surfaces. Be gentle, especially if the baffles are made of materials like aluminum, which can be scratched easily.
•5. Solvent or Cleaner:
• a. Exterior: Apply a gun solvent or cleaner to a cleaning patch or cloth and wipe down the exterior of the suppressor. This will help dissolve any stubborn fouling.
• b. Interior (for disassembled suppressors): If your suppressor can be disassembled, soak the baffles and other parts in a suitable cleaning solution. Follow the manufacturer's recommendations for cleaning agents.
•6. Rinse and Dry:
• a. Exterior: Rinse the suppressor with clean water and dry it thoroughly. Compressed air or a hair dryer on a low setting can help speed up the drying process.
• b. Interior (for disassembled suppressors): After soaking, rinse the baffles and other parts thoroughly with clean water to remove any residual cleaning solution. Ensure they are completely dry before reassembly.
•7. Lubrication (if necessary): Depending on the materials and design of your suppressor, you may want to apply a light coat of gun oil or lubricant to the exterior and interior surfaces. This can help prevent corrosion and reduce friction.
•8. Reassembly (if applicable): Put the suppressor back together using the tool to ensure the cap is properly placed and tight.
•9. Function Check: Ensure that all parts are securely in place and that the suppressor is properly aligned.
•10. Reattach to Firearm: If you've removed the suppressor from your firearm, reattach it making sure it is secure.
•11. Test Fire (Optional): If you're at a suitable range, you may want to test fire a few rounds to ensure everything is functioning properly.
•Non-serviceable suppressors only-use an ultrasonic cleaner- blow everything out with compressed air thoroughly until dry.